While I began to study fine arts at the University of Pennsylvania, I became interested in Renaissance drawing, especially silverpoint drawings by Da Vinci which were illustrated in books in the Furness Building’s fine arts library. I copied many in pen and ink and although I didn’t understand how they had been made, the silverpoints […]
A Second CNC machine
Last March, I began installation of a second CNC machine capable of work up to 60 x 144 inches in my 3rd floor studio. My first machine is now dedicated to wood carving while the second machine is for drawing and painting so I can now work several projects at once. This turned out to […]
“Jim” Collaboration with Lawrence Lithography Workshop
“Jim“, 2008, 43.25 x 30 inches, lithograph from seven plates on BFK Tan paper is available for $1,800 from Lawrence Lithography Workshop edition of 26. Collections: Nelson Atkins Museum of Art, Springfield Museum of Art, Beach Museum of Art, The Collectors Fund, Consumer Growth Partners At the opening of the Kemper Museum “Backstage Pass” show […]
Backsliding… “Jim” painting 80 x 44 inches (image area) — a colorful MESS
Yesterday (February 13, 2007) I completed a first LARGE painting using an airbrush mounted on my CNC machine to paint 22,000 0.4 inch squares (200 x 110 squares) in four transparent colors on Rives BFK paper. One of 17 simple shapes designed to produce tone in even steps from lightest to darkest was painted in […]
“Shea” 77 x 45 inch pen and ink drawing
I’ve been using the Z-axis of my CNC machine to lift the pen from the paper during jogs to new drawing locations, but these very small movements of .05 inches or so have severely worn a single tooth in the pinion gear which moves the Z so it will have to be replaced… In order […]
Computer Carving Machine operational!
The Large Press installation is almost done now! This week I’m cutting the final parts — the vacuum plenum for the press itself… This is a somewhat complicated task it turns out, but I believe I’ve got it figured out. I’ve successfully moved my ShopBot CNC machine from the 3rd to the 1st floor… After […]